-40%
Andrews Twin Cam Chain Drive Camshafts 48H Chain Drive Cam Set 216348

Andrews Twin Cam Chain Drive Camshafts 48H Chain Drive Cam Set 216348

$ 157.86

Availability: 100 in stock
  • MPN: 216348
  • Brand: Andrews
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Option: 48H Chain Drive Cam Set
  • Warranty: No Warranty
  • Restocking Fee: No
  • Disclaimer: *Picture for illustration purposes only. Actual product may vary*
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Manufacturer Part Number: 216348
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Seller

    Description

    Genuine Andrews Products
    Product Details:
    Splined chain drive camshafts
    99-06 models include one ball bearing; roller bearing, P/N 601788 can be purchased separately
    Designed for use with stock Harley-Davidson hydraulic lifters
    Can be installed on both carbureted and fuel injected models
    09H Grind/.492” Lift: Bolt-in Cam; More power through entire RPM range.
    TW21/.498” Lift: More torque for all around 1170-5200 RPM range; Similar to EV23 for Evolution.
    TW26A Grind/.490” Lift: For both carb and fuel injection; Bolt-in cam; 1800-5500 power band.
    TW31S Grind/.510” Lift: Great cam for motors with 95 in. and 9.8 to 10.2 compression; Lower TDC lift for easy installation; 2000-5600 RPM range.
    32H: High lift version of 31G; Much more power thru RPM range with 10:1 compression pistons; 2800-5800 RPM.
    TW37B Grind/.510” Lift: For both carb and fuel injection; Bolt-in cam; 2200-5600 RPM.
    48H Grind/.548” Lift: Broad tip cams for Baggers with stock motors; Max torque at low and mid RPMs.
    TW48: Broad tip cam for Baggers with stock motors; Max torque at low and mid RPMs.
    TW50 Grind/.510” Lift; Light bikes 88 to 95 cubic inch; Needs higher compression 9.5 to 1; 2800 to 6000+ power band.
    TW54: Specially designed for 95 in. plus engines with compression ratio up to 10:1; 2200-5600 RPM range.
    TW55: Great cams for 95 in. engines with 9.8 to 10.2 CR; Max HP and torque at mid and upper RPMs; 2600-6200 RPM.
    54H: Specially designed for 96 and 103 engines with CR up to 10:1; 2200-5600 rpm range; High-lift springs required on 99-04 engines.
    55H: Great cam for 96-103 inch engines with stock heads and 9.5 to 9.8 CR; Max horsepower: torque at mid and upper RPMs; 2600-6200 RPM range.
    57H: Specially designed for 103-110 inch engines; Bolt-in low RPM power galore for heavy bikes.
    TW60 Grind/.560” Lift: 95 in. or greater; Needs cylinder head work and exhaust; 2400-6000+ power band.
    67H: Performance cams for 96-110+ engines; 10.0 to 10.8 CR with high flow head set-up; 2600-6400+ RPM.
    TW67: Performance cams for 95-107+ inch; 10.0-10.8 CR - high flow head set-up; 2600-6400+ RPMs.
    *See fitment guide at the bottom of this listing*
    About Us:
    LeClare Powersports
    is a small-town Parts and Accessories store in Springfield, MO. Our low overhead allows us to offer better prices than the 'Big Boys', but our owner-operated store allows us to give our customers the great customer service they deserve.
    We only sell brand new, high quality GENUINE name-brand aftermarket parts...no junk, no knock offs and no "seconds". Buy with confidence!
    Fitment guide (if available):
    2006
    Harley-Davidson
    Dyna
    2007
    Harley-Davidson
    Dyna
    2008
    Harley-Davidson
    Dyna
    2008
    Harley-Davidson
    Rocker
    2007
    Harley-Davidson
    Softail
    2008
    Harley-Davidson
    Softail
    2007
    Harley-Davidson
    Heritage Softail
    2008
    Harley-Davidson
    Heritage Softail
    2007
    Harley-Davidson
    Softail Springer
    2008
    Harley-Davidson
    Rocker C