Autel MaxiBAS BT608 Auto Diagnostic Battery & Electrical System Analyzer Scanner

Description

Autel MaxiBAS BT608 Intelligent Car Battery Tester, Cranking Charging System Test, All Systems Diagnosis and Built-In Printer
The
MaxiBAS BT608
is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT608 can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The BT608’s VINscan function enables quick identification of the vehicle and battery specifications. Read/Clear codes on all available vehicles systems. Print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer.
BT608 is Autel's new intelligent car battery test tool, it mainly features as followings:
(1) Support in-vehicle and out-of-vehicle testing.
(2) Test
6 volt and 12 volt
batteries:
100 - 3000 CCA
(3) Test 12- and 24-volt cranking/charging systems
(4)
Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
(5) Compatible with
CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
(6) One-touch Battery registration
(7) Quick display of battery specifications through battery barcode scan,
Auto and manual VIN
entry
(8) Illustration instruction guides for battery positioning and testing
(9) Print test reports via
built-in thermal printer
(10)
All systerm diagnostics, Auto VIN and Read & Erase codes of all available systems
(11) Support
Cranking and Charging System Test
Unique Adaptive Conductance Technology, Diagnose low capacity batteries, Battery Registration and Replacement
Diagnose Low Capacity Batteries:
with the daptive Conductance Technology, BT608 can test very low capacity batteries accurately, reducing battery misdiagnosis and make your diagnostic more accurate.
Test the starter and alternator:
For the starter test, you can check the cranking voltage( 12V or 24V), cranking Amps and engine cranking speed. For the alternator test, you can check the functionality of the alternator, you will get many parameters such as data of Ripple, Off-load Voltage, Load Voltage, Off-load Current, Load Current and so on.
Wide Coverage:
Autel MaxiBAS BT608 is compatible with up to 53 more makes cars, don't need to worry about the compatibity.
One click Auto Registration after battery replacement:
BT608 can perform battery registration/replacement at a single touch of the screen. It offers illustration guides to show the whole battery replacement process.
All System Diagnosis
with
Auto VIN and Scan:
BT608 Auto Battery Test Scan Tool comes with Auto VIN and Scan to identity the vehicle and battery specifications automatically.
All System Diagnosis
with
Read, Erase Codes and View Live Data:
It read all DTCs codes and help to erase them with one click, in addtion, this BT608 can show live data and you can view it with graphic and text useful to analyze specific problems.
Battery, the Starter and Generator Test
Autel BT608 car battery tester is compatible with 6V/12V votages. Compatible with most cars. It can help to test the
Battery
, the
Starter
and
Generator
Comes with two rolls paper
Our Autel MaxiBAS BT608 Intelligent Car Battery Tester comes with two rolls papers, you can use it diretly to print reports, needlessly to buy another papers at first.
Wirelessly Connection
Autel MaxiBAS BT608 Intelligent Car Battery Tester also comes with MaxiVCI, It support WIFI wirelessly connection with your car. When using with it, you can insert it into your car.
Built-In Multimeter
BT608 has a Built-In Multimeter, you can use it to test and measure many specifications, such as voltage and current.
Note:
the multimeter cable is not included.
Wide batter compatible
Autel BT608 can work with 6V/12V
Flooded
,
AGM
,
AGM Spiral
,
EFB
and
GEL
batteries with
CCA(100 to 3000 CCA), CA, SAE, EN, IEC, DIN, JIS and MCA standards.
Built-in Pinter
BT608 can help to print test reports immediately after performing a test, you can save all reports in Data Manager so as to check in the future.
You can customize the information as you need, such as the logo, you can change it to your workshop logo, making your shop more prefessional.
Read and Clear Codes
It read all DTCs codes and help to erase them with one click, in addtion, this BT608 can show live data and you can view it with graphic and text useful to analyze specific problems.
On Aug-10-21 at 19:56:13 PDT, seller added the following information: