Car & Truck Electrical Circuit Tester Multimeter Relay Diagnostic Tool P100 P200

Description

Car & Truck Electrical Circuit Tester Multimeter Relay Diagnostic Tool P100 P200 P200 SMART HOOK Powerful Pro-be Description： 1. Intelligent identification of voltage/resistance 2. Multimeter mode (measure voltage, resistance, diode, continuity, current and frequency) 3. Relay test 4. Injector test 5. Diode test 6. Oscilloscope function 7. 0-5V adjustable power supply 8. Activation of vehicle components 9. Positive and negative polarity test 10. Intelligent circuit breaker protection (adjustable overload) 11. Screen style background optional 12. Network online upgrade 13. Built-in Multi Lingual. Product packing list: Support Multi-Language: English, German, French, Italian, Spanish, Polish, Portuguese, Russian, Vietnamese, Filipino, Indonesian, Malaysian, Arabic, Thai.
Store category
Sign Up Now !
You may also like
Car & Truck Electrical Circuit Tester Multimeter Relay Diagnostic Tool P100 P200
Product Description
Car & Truck Electrical Circuit Tester Multimeter Relay Diagnostic Tool P100 P200
JDiag P100
Circuit Tester
Language Support: English, German, French, Spanish, Portuguese, Russian, Italian.
JDiag P100 Electrical System Circuit Tester test car battery voltage, AC and DC voltage test, resistance, leakage, short circuit, components activation Overload protection etc.with large battery clip, can carry more load.Support wide input voltage range from 9V to 70V, also support 12V cars and 24V trucks.
Product Function Introduction:
1.Voltage & Polarity Testing-Determine DC/AC Voltage and Postive/Negative quickly.
2.Resistance Continuity Testing- LCD Screen display the value of resistance.
3.AC Circuit Singal Testing- Fast to trubleshoot the sensors circuit problem.
4.Components Activation in your hand, in the vehicle or W/Ground.
5.Testing Trailer Lights.
6.
Built-in Flashlight enables you to work in the dark.
7.Checking for Bad Ground Contacts and Locating Short Circuits,allowing you to follow and locate shorts fast without wasting fuses.
8.The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
9.There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
✪
DC Voltage：
While the tool in this mode, Contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolutioin of 0.1 volt
✪
AC Voltagee：
While the tool in this mode, Contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min Voltage, Frequency and duty cycle.
✪
Resistance：
While the tool in this mode, Contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.
✪
Tone On / OFF：
While the tool in this mode, Just do a quick press of the mode button to toggle the tone On or OFF.
Specifications:
1. Display: TFT color display (160 x 128 dpi)
2. Operating Temperature: 0 to 60°C (32 to 140 F°)
3. Storage Temperature: -40 to 70°C (-40 to 185 F°)
4. External Power: 12.0 or 24.0 V power provided via vehicle battery
5. Dimensions: Length 165 mm * Width 40 mm * Height 27 mm
Test Tool Specifications:
DC voltage range : 0-65V +1 digit
Resistance range : 0-200 K ohm
Frequency response of tone pass through
0Hz to 10K hz.
Circuit Breaker
Rating current: 1-10 Amp
Testing Standard:
100% current : no trip
150% current: trip in one hour
200% current: trip in 3-30 seconds.
300% current: trip in 0.5-4.0 seconds.
JDiag
P200 SMART HOOK Powerful Pro-be
Multi-language
Support ：
currently supports 14 languages
English, German, French, Italian, Spanish, Polish, Portuguese, Russian, Vietnamese, Filipino, Indonesian, Malaysian, Arabic, Thai.
Product Function Introduction:
1.
Measurable 12v-24v Power Supply
2.
Intelligent Recognition Of Voltage / Resistance
3
Multimeter Mode (Measuring Voltage, Resistance, Diode, On-Off, Current And Frequency)
4.
Relay Test
5.
Injector Test
6.
Diode Test
7.
Oscilloscope Function
8.
0-5V Adjustable Power Supply
9.
Vehicle Component Activation
10.
Positive And Negative Polarity Test
11.
Intelligent Open Circuit Protection (Overload Adjustable)
12.
Screen Style And Background
13.
Network Online Upgrade
SMART TEST MODE
Smart test ,
Voltage test ,
Resistance test , P
ostive/negative test
MULTIMETER TEST MODE
Wunctions display At the bottom of the interface is the fuctional area from left to right are:DCvoltage(VDC),resistance(OHM),diode/continuity test (DIO),current(AMP),frequency(HZ)
OSCILLOSCOPE TEST MODE
instructions:
1. START/STOP :press OK to start or stop waveform refresh
2. DIV: voltage per grid (test range 1V-49V),press UP and DOWN keys to adjust the voltage value
3. TIME::time parameter
4. HZ :display test frequency
RELAY TEST MODE
The VCC at the top of this interface displays the power supply voltage value.it shows 2 types of common automotive replay diagramsm (5-terminal relay and 4-terminal relay),press the LEFT button to move selection, press the OK button to view the wiring connection diagram of these 2 different relays
COMEPONENT ACTIVATION MODE
The component activation function is designed to generate activation signals to the tested components, such as activating lights, motors and other on-board electrical equipment
POWERED BY MODE
The 0-5V power supplly function is useful when checking the wiring to the ECU/ECM.after you check the sensor with a multimeter,if there is still a prob-lem, you can simulate the voltage output by the sensor to verify the wiring to the ECU
INJECTOR TESTER MODE
The probe outputs different pulse signals to the injector and check the injector spraying status.this function can help diagnose injector conditions.It can work with any fuel pressure tester
Product specifications and parameters:
1.
Display:............ (320*240 DPI) TFT true color display
2.　Working temperature: ........... 0-60°C (32-140 F°)
3.　Storage temperature:...........40-70°C (-40-185 F°)
4.　External power supply: ... 12V or 24V powered by battery
5.　Minimum working voltage:...9V
6.　Maximum working voltage: 30V
7.　Maximum measuring voltage: 150V
8.　Minimum measuring voltage: .....................0.1V
9.　Resistance measurement range:... 1 ohm~200K ohm
10. Current measuring range: ..................... 0~18A
11. Maximum continuous current: ..................... 18A
Product packing list:
1) Main unit
2) Solid copper test probe
3) Double pass test connection line
4) Alligator clip battery cable (Special Design)
5) Relay test line
6) Probe adapter
7) 20Amp fuse
8) Operation manual
9) Black durable tool box
☎About service:
Extensive application, professional diagnosis, support multi language. If you have any questions about product series and communication protocol, please email us and we will reply to you within 24 hours.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We only accept PayPal payment.
Please contact us if you need another method to pay.
Payment should be made within 3 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
We are not responsible for buyers local taxes, please consult your local Customs for tax details. Please note that the customs duties should be borne by you.
Delivery details
Items will be shipped within 1 business day on payment received.
Items are shipped from using Airmail ,reach most of the countries within 7 to 15 business days usually.
Delivery time depends on destination and other factors, it may takes up to 35 business days.
We will ship according to your EBAY address.
Please make sure it's correct and include phone number for delivery.
If you do not receive your order in the estimated time, please contact us,we would do our best to solve your problem of delivery.
Terms of sales
1 Year free warranty, lifetime maintain for the devices.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
Return items MUST have all ORIGINAL packaging and accessories.
Items should be returned on buyers' shipping cost for repair or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
About us
Who We Are?
We are a professional worldwide Professional Company, with own factory located in China. We supply many products on Automobile consumer.
And we are the professional original JDiag factory . Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
Contact us
Welcome to our store!
1.if you are satisfied with our product or our service, please leave Positive Feedback Positive feedback rating and 5-stars ★★★★★, we will appreciate for your help.
2.if you have any problem of the goods, please contact us first, before you leave to neutral feedback Neutral feedback rating or negative feedback Negative feedback rating, we promise we will try our best to deal with your problem.
3. business time: (GMT 9:00 am-18: 00 pm) Monday to Saturday
4.We appreciate your patience and support. Thank you for choosing us and have a great day!
Feedback